Home blog How Do You Install A Double Light Switch And A Fan?

How Do You Install A Double Light Switch And A Fan?

07th May 2022

If you want to convert your light as well as a fan into smart devices, the best option is to use a smart dual switch. This type of switch has dual connections in a single panel.

In one switch, you can connect the electrical wire for the fan and in another one, you can connect the wire for lights. This way, you can easily operate the light and fan from a single board but with two different switches.

It will help you to save a lot of money as you don't have to purchase two separate switches. Nowadays, many people are using this technique to automate lights and fans.

You can simply use your phone or voice command to control the light and fan in your home.

If you want to use this dual switch, we can help you. In this article, we will show you how to install a double light switch and a fan. 

What Is A Double Light Switch?

A double light switch is a wiring fixture that allows you to control the lights as well as a fan. It has two wires: a hot wire and a neutral wire. The hot wire is usually red, although it can be black. The grounding or "neutral" line is white, and it is the opposite of the hotline. 

To determine which wire goes where find the tab on the double switch. A double light switch is a good choice if you want a light and fan connection on the same board. 

The double switch allows you to operate each individually. To change a single light switch into a double one, you should have an electrician install a new one. 

The wiring of a single light switch is not complicated, but you should have a voltage tester and a screwdriver on hand. The wiring process will take longer if you don't have enough experience.

The wiring of a double light switch is similar to that of a single light switch, but there are some differences. The switch may be older, or you just want a new look. 

When replacing your double light switch, remember to follow instructions and electrical safety guidelines. If you don't know where the wires are, a voltage detector is the best tool. 

What Is A Double Smart Switch?

A double smart light switch is similar to a traditional light switch, but they communicate with a smart hub instead of a single light. They are perfect for replacing existing light switches. 

These devices work with voice assistants and can be connected to other devices in your home, including smart hubs. They can control lights as well as fans in your home via voice assistant. However, you should be sure that your home is compatible with these new devices before installing them.

A smart light switch that connects to the internet is easy to install. You can use the device to control the brightness of the lights as well as the speed of the fan. Many types of lights can be controlled through these devices, including motion sensors. 

The majority of smart light switches connect to WiFi, so you can control them without an internet connection. Other types of smart light switches require a separate hub for operation, such as Z-Wave and Zigbee. These models can be connected to a smart home automation system through the internet.

Another feature of smart light switches is their ability to dim and change brightness. They are programmable and have timers, so you can set them to turn off at a certain time if you are away. 

Some of these devices can even be controlled via a smartphone, making them even more convenient. Moreover, they can reduce energy costs by dimming the lights.

How to Install a Double Light Switch and a Fan?

If you want light and fan connection in the same double smart switch, we can help you. Follow these steps to install a double light switch with a fan.

· Step 1: Turn Breaker Off

The first thing you need to do is turn the breaker off to avoid getting a shock. You can use a tester against the switch to make sure there is no current flowing.

· Step 2: Open Old Switch

After that, you need to open the old switch. Open the screws and remove the old switch. You will be able to see wires when you open the switch box. 

· Step 3: Name the Wires

Now, you need to check the connected wires carefully. Make sure you identify and name the wires carefully. It will help you to know which wire will be put in the fan switch and which one is the light switch. You need to name the live, neutral and ground wires correctly. 

· Step 4: Remove Old Switch

Once you name the wires, you need to remove them from the switch. Once the wires are free, you can easily remove the old switch. Make sure you don't mix the wires while removing the switch.

· Step 5: Install New Double Smart Switch

Now, you need to install the new double smart switch. Here, instead, there will be two separate switches in a single plate. You need to connect the wires to the new switch. Make sure you connect the live wires with the respective switches button first. After that, connect the neutral wires and then the ground wire. Once it is done, close the switch box and screw it.

· Step 5: Connect the Switch

Once the switch is installed, you can set it up using the app. You must have a WiFi router. Then, you need to connect your phone to the switch. You need to set up the app so that it can connect to the switch. Now, you must connect the smart light and fan with your smartphone and make it work with your existing wiring.

· Step 6: Operate Fan and Light

Now, you can easily operate the light and fan from a single switch panel. You can also use your phone to control the light and fan in the room. It will help you to adjust the brightness of the light as well as fan speed. 


Recent News

Request a Quote