Home blog How Do I Mount A Power Strip Without Holes To The Wall?

How Do I Mount A Power Strip Without Holes To The Wall?

13th May 2022

If you're wondering how to mount a power strip without holes in the wall, there are a few easy ways to do it. You don't necessarily need to drill the holes in the wall. There are a few tricks and tips to help you easily mount a power strip without holes.

For those without drill bits, you can use a mounting template. This way, you can easily mount the power strip flush against the wall. It's also possible to use a holder to hold the power cord. Make sure to use a level surface. 

Another solution is to use adhesive. Superglue can damage the wall and the power strip, so it's best to use an adhesive. In addition, you can buy power strip holders that can be mounted to the wall or desk. You can find them cheaply online. 

If you want to know how to mount a power strip on the wall without drilling holes, continue reading this article.

What is a Power Strip?

If you're wondering what a power strip is, you've come to the right place. A power strip is simply a device that allows you to plug in various appliances and devices without requiring a connection to a wall outlet. These devices are often used in commercial settings, where additional power is required for a certain function. While many consumers may think that a power strip is useless, in reality, it's a highly useful piece of equipment.

If you're wondering what a power strip does, a simple explanation is that it acts as a conduit for electricity to various plug-in appliances. It can be as simple as an extension cord or as complex as a circuit-protected switch box. However, if you're looking for something a little bit more sophisticated, you should consider buying a surge protector instead of a power strip. 

Another benefit of using a power strip is that it's safe. Just like any other electrical appliance, a power strip has the potential to malfunction. But because they're designed to be safe, they have failsafe mechanisms that protect users. Another plus is that they don't use more energy than other devices. 

Is It Safe to Mount Power Strip On A Wall?

Yes, it is safe to mount a power strip on a wall. However, you need to install it properly. Apart from that, you need to follow safety guidelines as well. If you're planning to mount a power strip on a wall, there are some things to keep in mind. 

Before you mount a power strip on the wall, you must know the capacity of the main outlet. Make sure you've checked the power requirements of all of the items you want to use. Overloading a circuit could result in a fire hazard. Also, the cords on the power strips can get hot if you step on them. Moreover, you shouldn't use them for extended periods of time.

How to Hang a Power Strip without Nails Or Screws?

If you don't want to drill holes in the wall, you can simply mount the power strip using KLAPiT. Here is a step by step guide to help you easily mount a power strip. 

· Step 1: Selecting The Right Power Strip

First of all, you should select the right power strip for your specific need. If you're using a power strip to connect multiple devices, make sure the power supply is the right one for the situation. If not, you could end up with an overload and a fire. Also, be careful not to overload power strips by daisy-chaining them together. In the end, you should always choose a power strip that doesn't draw too much current or has a high voltage. When shopping for a power strip, it's crucial to select the one that has the right length, number, and type of outlets. Ideally, it will have enough outlets to accommodate all your appliances. A power strip with an on/off switch will allow you to turn all of the devices on and off at once without having to unplug the device from the wall.

· Step 2: Buy a Pack of KLAPiT

In order to mount the power strip without any holes, you can use KLAPiT. It is a new innovative product designed to help people place different objects on the wall without drilling holes. It is simple and easy to use. After you choose the type of power strip, you need to buy a pack of KLAPiT. The KLAPiT is equipped with two adhesives - a beta tape and an alpha tape - and a magnet that sticks to the wall. You need to open the pack of KLAPiT and check the instructions to use it.

· Step 3: Mark Where To Install The Steel Tapes

If you don't want to drill or screw into your wall, you can hang your power strip with the KLAPiT method. You just need to measure the distance between the holes and the centre of the wall and mark them. You need to use a measuring tape to measure the distance on the wall and mark it with a pencil. It will help you to easily install the steel tapes. Determine where you want to mount the power strip. After that, measure the size and mark the points on the wall. 

· Step 4: Install the Beta Steel Tapes 

Once you mark the point on the wall, the next thing you need to do is install the beta steel tapes on the power strip. Make sure that you secure the tapes on the power strip correctly. The greater the pressure, the stronger the bond. Make sure to align the centre of the two tapes to ensure that they will stay in place. 

· Step 5: Install Alpha Steel Tape 

You can use Alpha Steel Tape to install a Power Strip on the wall without using screws or nails. First, you must make sure the strip is level and has the same spacing. After that, you can install the alpha steel tape on the wall where you have marked the points. Put pressure on the tape so that it sticks easily. 

· Step 6: Install the Power Strip On The Wall

Now all you need to do is install the power strip on the wall. Place the beta steel tapes on the power strip to the alpha steel tape on the wall. Make sure both the tapes are secured correctly. Put pressure on the strip to secure it correctly. Now, the tapes will get stuck to each other, and the power strip can easily stay on the wall. 

Recent News

Request a Quote

Submit