How Do I Choose a Smart Switch?
Installing a smart light bulb can be easier than installing a smart switch. The challenge, however, is to make sure it works with existing equipment. Most smart lamps have A- and E-shaped bases, so they may not always match existing lighting fixtures, especially if you need a different design like a candle holder.
If you are using an Apple HomeKit compatible product (Ecobee or iPad thermostat), you should check the iDevices switch and power outlet. If you're using the Nest Learning Thermostat, check out the Zuli Smartplug. If you're using SmartThings, check out GE Smart Switch.
Features you should look for
Quality smart switches should have handy controls that help them to directly work with the WiFi network of your home. You can check your home even when you are not at home. This increases the security of your home and gives the impression that someone is home. Lights can be programmed to stay on at certain times to control and save energy.
You may have existing bulbs to maintain existing home lighting and design, especially if you can use custom and unusual lights. The technology that is already used in your daily life should work with the switches and plugs you intend to purchase. If you don't know which platform to use the switch or connector on, you need to know which communication protocol to use.
Smart switches run a programmed lighting schedule even if you turned off the switch. So don't worry in case you forgot to turn it on. Smart switches are cheaper than adding three or more lights. Each switch can cost up to one switch.
Features of latest smart switches
There are many smart switch options out there, and it can be difficult to find the correct switch for the house. Here are some things to look out for to easily find the best switch for the house. The most commonly used protocols for smart switches are Wi-Fi, ZigBee, Z-Wave, and Bluetooth. Each has its own strengths and weaknesses. Therefore, to ensure a smooth connection between all home devices, you need to choose the correct wireless protocol.
Wireless communication is the primary way smart home devices send and receive data from each other. Almost all major smart plugs or switches are listed on the box with a Z-Wave, ZigBee, Bluetooth, or Wi-Fi connection. In this way, the device communicates with the other devices in the house.
The choice of the operating system or software is too much important. A majority of smart switches can be accessed through iOS and Android devices. However, a test is required if you choose between them. There are several smart switches which work well on the same OS as well as sync well.
The secret is to find the quality smart switch that fits your specific setup needs
Quality smart switches typically include any combination of features such as presence automation, scheduling, energy monitoring, integrated automation with other smart home devices, surge protection, and dimming. Your smart switch needs to have these qualities listed below:
● The high-quality smart switches, some of the most expensive, offer many next-generation features. One of them is a motion detector, which can automatically turn on and off when you enter and leave a room.
● You can also turn on a small night light to help you navigate in the dark. With Alexa, a built-in microphone, and speakerphone, Amazon Assistant is easy to use.
● The high-quality smart switches also have a temperature sensor. This means you can connect to an Ecobee thermostat to better control the climate in your home. However, it cannot be used in a 3-wire configuration and requires a neutral wire.
● Some of the common switches of light are 3 or 4 positions. This means that there is more than one switch that controls a light source. If you also have such kind of light switch at home, the first thing you need to know is whether the smart switch you choose supports this type of connection. This is because a few smart switches don't work.
● This means you know if you need a switch or socket, what features you need, what platforms and protocols you need, and where you want to use your device. They should point you in the right direction, but sometimes it's impossible to find the perfect one.
● The current wall switch needs to be replaced to install the smart switch. Some products include expert installation. However, if your selected smart switch is lacking it, then you need to understand the basics of electric work, such as how to activate the circuit breaker. In case you need full access to the smart switch, all you need is to connect all cables to the new one and replace the entire existing unit. Fortunately, smart sockets and switches are the most flexible devices in a smart home. Hence, it takes some time and research to create satisfying customization.
● Superior quality smart switches are high-tech switches with multiple buttons designed to access the many options offered. In the center is a dimmer with white and gray buttons. Plus, it has impressive features like geofencing, compatibility, and scheduling with many smart home platforms.
A few more features of high-quality smart switches
The high-quality smart switches can be controlled with voice commands via Google Home and Amazon Alexa. The only drawback is that it must be connected to a smart hub so that it can work. Moreover, the hub is also connected to the router directly, so you can access it by one tap with the smartphone you have..
The high-quality smart switches consist of a Room Director dimmer with an OLED color touchscreen display that replaces the main switch in the room and up to 10 normal looking expansion switches. This system allows you to create multiple light scenes which can include all the lights in a room at preset brightness levels depending on the mood. However, these high-quality smart switches are costlier than normal smart switches.